Gas Prop Brackets
 |
 |
| LB-132-90° 13 GA | LB-132-105° 13 GA |
 |
 |
| SB-180 12 GA | LB-185 12 GA |
 |
 |
| SB-145 12 GA | LB-115 14 GA |
 |
 |
| LB-172 14 GA | LB-169 14 GA |
 |
 |
| LB-169-R 14 GA | LB-149 13GA |
 |
 |
| LB-168 14 GA | SB-195 13GA |
 |
 |
| LB-190L 14 GA | LB-190R 14GA |
 |
 |
| LB-155L 14 GA | LB-155R 14GA |
 |
 |
| SP-173 14GA | SB-169 FLAT 14GA |
 |
|
| SB-120 14GA | |
Threaded Ball Studs
 |
 |
 |
| HS-101 | HS-106 | HS-109 |
 |
 |
 |
| HS-130 | HS-136 | HS-139 |
 |
 |
 |
| HS-125 | HS-142 | HS-160 |
 |
 |
 |
 |
| HS-201 | HS-203 | HS-401 | HS-107 |
Riveted Ball Studs
 |
 |
|
| SB | LB | |
 |
 |
 |
| BS | SP | XLB |
Riveted Ball Studs are for use with brackets and are not intended for sale separately.
Please specify bright zinc or black zinc when ordering ball studs. Black or yellow zinc parts require an additional 7 to 10 days to produce. Brackets can be ordered with any of the riveted type ball studs listed above, please specify. Ten millimeter ball stud diameters are .384/.389. All bracket mounting holes are .203 unless noted. Most Parts are also available in aluminum or stainless steel on a special order basis. Heat treating is also available on most parts at the customers request and at an additional cost. All parts are designed and produced to Hibshman Screw Machine Products, Inc. specifications and are not intended for any specific application. |
 |
 |
 |
 |
 |